archive-ru.com » RU » E » ELEKTON.RU

Total: 80

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • ELEKTON: switchboards and oil production equipment. ELEKTON-04.
    to increase operation safety There is possibility to link up to telemechanics through RS 485 port protocol Modbus supported Switchboards operating data can be transmitted into notebook for following treatment analysis and storing in the data base In Elekton 04M 250 400 Switchboard in contrast to Elekton 04 250 400 Switchboard the power circuit s flexible contactor has been substituted for copper bus Elekton 04 250 400 Switchboard has been provided with a possibility of soft starter Certificate of conformance RU C RU МЕ47 B 00093 Certificate of conformance zoom Specifications Operation factors ELEKTON 04 250 400 630 800 1000 Climatic version UHL1 GoST 15150 69 Protection category Ip43 GoST 14254 80 Rated supply voltage V 380 50 1Hz Supply voltage deviation range 20 Primary power circuit rated current A not more 250 400 630 800 1000 Submersible motor power kW not more than 100 160 250 320 400 Temperature condition С 60 40 Switching unit contactor 250 400 630 800 1000 А Switching unit control circuit controller ELEKTON with programmed microprocessor Overall dimensions mm weight kg not more ELEKTON 04М 250 400 135 х 700 х 520 110 120 ELEKTON 04 250 400 1735 х 800 х 640 155 170 ELEKTON 04 630 1735 х 850 х 752 210 ELEKTON 04 800 1000 1860 х 950 х 1000 370 380 Application Permit zoom Features Cables are connected in special section mounted on the cabinet s back board upper part Such design facilitates assembling of the switchboard on the multiple well platforms This design is covered by several patents 0 4 kV cable clamps provide connections up to 3 cables with section 95 mm 2 or up to 4 cables with section 120 mm 2 for each phase Switchboard s design is highly maintainable and has safe production service system

    Original URL path: http://www.elekton.ru/elekton04_e.shtml (2016-04-30)
    Open archived version from archive


  • ELEKTON: Switchboards and oil production equipment. ELEKTON-07.
    system on Modbus RTU protocol For further analysis of the pump unit operation and entry into the data base the information about the Switchboard operation is read out to the portable computer read out unit BSI 04 or standard USB Flash Drive Among regular standard algorithms of soft start there is additional quasi frequency mode of motor launching for large static moment cases Short time period of work of electric motor with low frequency 25 12 5 Hz is possible Operation modes are set with the help of two settings inrush current 100 500 start up time of the motor 0 10 s and start mode selection soft start regular motor launching start with jogging high starting moment launch with following switching to soft start mode quasi frequency mode high starting moment launch with following switching to soft start mode full engagement start for modes with direct switching on Soft start equipment gives ability to limit peak load both motor and machinery to reduce starting current in some cases not to use friction coupling or hydraulic clutch to carry out contactors commutation while current is absent Certificate of Conformance zoom Application Permit zoom Specifications Operation factors ELEKTON 07 400 630

    Original URL path: http://www.elekton.ru/elekton07_e.shtml (2016-04-30)
    Open archived version from archive

  • ELEKTON: control stations (switchboards) and oil production equipment. ELEKTON-05 - variable speed drive.
    section automatic mode of operation factor pressure temperature level etc maintenance slip fluctuation compensation while AM is engaged in work with mechanism with large moments of inertia автоматическое управление технологическим параметром в зависимости от времени суток data exchange via RS 232 and RS 485 channels operational efficiency in field reduction mode with rotating speed beyond rated ability to change U F characteristic for various kinds of loads Certificate of Conformance Specifications Operation factors ELEKTON 05 32 63 75 100 160 250 400 630 800 1000 1200 1600 Climatic version UHL1 GoST 15150 69 Protection category Ip43 GoST 14254 80 Rated supply voltage V 380 50 1Hz Supply voltage deviation range 50 25 Primary power circuit rated current A no more 32 63 75 100 160 250 400 630 800 1000 1200 1600 Converter s rated power kVA no more 20 40 47 63 100 160 250 400 500 630 800 1000 Temperature condition С 60 40 Protection category Ip43 Frequency variation range Hz 3 5 80 1 Switching unit control circuit controller ELEKTON 09 with programmed microprocessor Dimensions mm 32A 63 75 100А 1930x870x560 Weight kg no more 170 Dimensions mm 160 250А 1735х898х696 Weight kg no more 330 Dimensions mm 400А 1890х925х758 Weight kg no more 380 Dimensions mm 630 800А 1925х1205х1123 Weight kg no more 750 Dimensions mm 1000А 1925х1205х1144 Weight kg no more 800 Dimensions mm 1200 1600А 2524х1903х1576 Weight kg no more 1725 VSD ELEKTON 05 1600 Structure of symbolic notation PCh Т Т P Т 160 380 50 Х UHL 1 2 3 4 5 6 7 8 9 10 1 Type variable speed drive PCh 2 Supply power current 3 phase Т 3 Output current 3 phase Т 4 Cooling air forced П 5 Semiconductors of power circuit transistors Т 6 Rated output current

    Original URL path: http://www.elekton.ru/elekton05_e.shtml (2016-04-30)
    Open archived version from archive

  • ELEKTON: switchboards and oil production equipment. ELEKTON-05.
    by setup are stored in the controller Built in RS 485 interface makes possible link up to remote control system Operation data can be read out into a notebook with application package ElektonUV into Read out Units BSI 04 for following analysis of functioning and diagnostics of pumping facility The Switchboard is certified Certificate of conformance РОСС RU ME20 B02894 Switchboard ELEKTON 06 R Application Permit zoom Certificate of conformance

    Original URL path: http://www.elekton.ru/elekton06_e.shtml (2016-04-30)
    Open archived version from archive

  • ELEKTON: Submersible Telemetry System (downhole sensor) ELEKTON-TMS-3.
    with case diameter of 103 117 130mm Stator winding should be star connected in the bottom part of motor for link up of this kind Surface unit ELEKTON TMSN 3 Surface unit ELEKTON TMSN 3D Functional capabilities The set of Submersible Telemetry System ELEKTON TMS 3 consists of downhole unit ELEKTON TMSP 3 connecting unit for docking to ES Motor surface unit ELEKTON TMSN 3 Telemetry data from submersible unit are transmitted via ES Motor power cable treated in surface unit and transmitted into controller Data on controlled parameters are stored in memory and induced on display of the Surface unit ELEKTON TMSN 3D or ELEKTON switchboard s controllers and with the help of software could be examined in table or graphic mode on computer s display or transmitted to the telemechanics system via interface the RS 485 ModBus protocol Surface unit TMSN 3 is compatible with downhole units TMSP 2 TMSP 3 Surface unit ELEKTON TMSN 3D is additionally equipped with 4 line LC display and keyboard for look up and system tuning with no switchboard s controller ore notebook It has a relay with the group of switchable contacts arranged on the outer link up connector Setting up of the relay can be made with the help of shields menu trough keyboard display or computer Relay activation can be run along any tested parameter both one of them and several This option can be used with switchboards which controller has no RS 485 RS 232 interface or analog input as well as for remote control systems Certificate of conformance РОСС RU АB57 H01173 Certificate of Conformance zoom Application Permit zoom Specifications Parameters Measuring range Rated supply voltage V 110 220 Allowable long time supply voltage V 80 400 Supply voltage frequency Hz 50 Peak loading current mA 10

    Original URL path: http://www.elekton.ru/tms_e.shtml (2016-04-30)
    Open archived version from archive

  • ELEKTON: Switchboards and oil production equipment. PUVSR.
    1 УХЛ1 ТУ 3416 003 43174012 2001 Special compartement with transformer ТМПГ 400 6 АУХЛ1 control panel OBUZLAR Cable connection box KSP 25 PUVSR 05 1000 1000 6 on the chassis of truck trailer MAZ 8926 017 02 Certificate of Conformance zoom Specifications Operation factors PUVSR Dimensions not more mm 5900х2200х2440 Weight kg 4000 Base frame Two longitudinal channel 24 liked with cross beam of из channel 10 Multipurpose body Metal framed structure roof anf walls are metalled with 0 8 mm galvanized iron Bottom of iron 1 5 mm is treated below with rust preventing agent primer and paint coated Warming Heat insulation ISOVER coated with linoleum Walls are of 90 mm in thickness Wainscoting 6 mm plywood is treated with drying oil and paint coated Windows Window structure 600 600 with double glazing Conditioning air conditioner LG LWJO561FCG Transformer ТМПГ400 6 АУХЛ1 frequency 50 Hz power 425 8 kWА HV winding rated winding voltage 2 998кВ LV winding rated winding voltage 0 380кВ HV winding rated winding current 82А LV winding rated winding current 647А climatic version UHL1 VSD ELEKTON 05 1000 Identification ПЧ ТТПТ 1000 380 50 1 УХЛ1 supply voltage 3x380 V output voltage 3 phases

    Original URL path: http://www.elekton.ru/puvsr_e.shtml (2016-04-30)
    Open archived version from archive

  • ELEKTON: control stations (switchboards) and oil production equipment. Test bench IS-01 (02).
    0 to 400 A Running regime long term Built in resistance box enables check up of insulation control system Installed resistor box makes possible to check up insulation control equipment Dimensions mm 350x450x250 Weight not more kg 36 0 Main features Power supply of the test bench three phase network 380 V 50 Hz Voltage deviation should be within the range of 10 10 Rated current while testing supply voltage not more than 1 7 A for each phase Test bench s rated current in the current transformer probe mode in the 380 V circuit not more than 3 A Range of test bench output voltage change 0 450 V Range of output current changes in the current transformer probe mode 0 100 А 0 400 А Note test bench operation time under maximum probe current must not exceed 5 minutes with the following cooling for 20 minutes Discrete values of insulation resistance 500kОм 5 30 kОм 5 The test bench supports supply of three phase voltage 50 Hz to the tested object within the range 0 450 V linear output voltage control through indicator facility Possibility for certified instruments to be connected for output voltage control output voltage disbalance

    Original URL path: http://www.elekton.ru/is_e.shtml (2016-04-30)
    Open archived version from archive

  • ELEKTON: control stations (switchboards) and oil production equipment. Contactors KEM.
    V 3 phases 50 60 Hz АS3 110 200 250 250 420 700 Permissible power АS3 kW КЕМ 63 КЕМ 100 КЕМ 160 КЕМ 250 КЕМ 400 КЕМ 630 220V 230V 18 5 30 55 75 125 220 380V 400V 30 55 90 132 230 375 415V 440V 37 55 100 132 230 400 500V 40 65 110 160 300 480 660V 690V 45 65 132 200 375 500 Control

    Original URL path: http://www.elekton.ru/cont_e.shtml (2016-04-30)
    Open archived version from archive